CP554 Diode bridge compressor for 500 series - DIY Analog Pro Audio
search
  • CP554 Diode bridge compressor for 500 series - DIY Analog Pro Audio
  • CP554 Diode bridge compressor for 500 series - DIY Analog Pro Audio

CP554 Diode bridge compressor (mono) for 500 series

$619.00
$629.00 VAT incl.
$629.00 VAT excl.

The CP554 is a transformer coupled diode bridge compressor based on the design of legendary British consoles, adapted to the 500 series format.

Choose Kit or Assembled product
Quantity

  Secure payments

via Paypal, Stripe or bank transfer

  Worldwide shipping

on Mondays and Thursdays

  DIY 100% de succès

Documentation premium - Forum de support - Service de réparations


CP554

Bootstrap Image Preview


The CP554 is a transformer coupled diode bridge compressor based on the design of legendary British consoles, adapted to the 500 series format.

It is the ticket to immediate access to the classic, harmonics-rich sound of the seventies.

The CP554 adds some features to the original such as a variable attack time, one additional 12:1 ratio or a high-pass filter in the side chain with three frequencies.


Highlights

    • Three Carnhill transformers in the audio path,
    • Same output stage as in the MP573 preamp,
    • Variable attack time,
    • Additional ratio of 12:1 makes a limiter,
    • Side chain EQ with 3 high-pass frequencies,
    • External side chain input,
    • All stepped controls,
    • Analog gain reduction meter,
    • High grade electronic components throughout,
    • High grade four layers PCB,
    • Available assembled or as a full kit (everything included).

Controls

Bootstrap Image Preview

1: STEREO Connects two compressors in stereo. Whichever unit receives the loudest signal at any moment, controls the sidechain

2: Meter displays the gain reduction in DB.

3: THRESHOLD Rotary switch that sets the input level at which compression begins, from -21 to +12 dBu.

4: RATIO Rotary switch that sets the compression ratio from 1.5 to 12.

5: ATTACK Rotary switch that sets the attack time from 0.5 to 16 milliseconds.

6: 50-100-200 Hz Inserts a 50, 100 or 200 Hz high-pass filter in the side-chain. Produces a Fat sound and eliminates bass driven pumping.

7: BYPASS Hardware bypass by relay (when button is released).

8: MAKEUP Rotary switch that restores the signal level after being compressed.

9: RECOVERY Rotary switch that sets the release time from 100ms to 1.5 second. The A1 and A2 positions set 2 automatic release times which are program dependent (fast on isolated peaks but slower for the average level).

10: SIDE CHAIN Controls the source for the side chain. It can be INT: internal, OFF: No compression, EXT: the side chain comes from the second input (the module is 2 units wide)


What's in the kit?

Absolutely everything!

  • 3 Transformers,
  • Passive components (resistors, capacitors),
  • Active components (diodes, transistors, IC's),
  • Front panel elements (switches, potentiometers, analog meter, knobs),
  • Connectors, relays,
  • PCB's,
  • Front panel and side panels,
  • All hardware.

You bring the solder (use good quality solder, 1mm diameter max) and the Lunchbox.



Difficulty level

The CP554 kit is a medium difficulty kit. Nothing difficult but a large number of components.

The setup is simple but requires using a good quality digital multimeter.

PK019

Specific References


Technical specifications

Measure Conditions Value
Noise Gain 0dB
Gain 0dB, A weighted
< -78 dBu
< -82 dBu
Maximum output level before clip f=1kHz +26.5 dBu
Frequency response Deviation +/-1 dB 10Hz - 28kHz
Idle supply current No input signal V+ : +105 mA
V- : -97 mA
Input impedance f=1kHz 10 kΩ
Output impedance < 80Ω
THD + Noise f=1kHz without gain reduction < 0.02%

Documentation

Reviews

Grade 
Quality

Alex Harmer
09/28/2024

Incredible compressor

I built two of these mono units in March 2024.

I work for the national broadcaster in my country and I have been using these on individual bus and master bus duties for my music recordings ever since.

Authoritative, full range, sublime.

They can be transparent if at 1.5 ratio with a low threshold, or give you very solid control with a ratio of 2 onwards. The threshold control is important and powerful.

Wonderful kits, they complement our genuine Neve 2254/E units perfectly. I think these are a viable replacement for the real thing, in a time when the real ones are getting much harder to find.

Write your review

CP554 Diode bridge compressor (mono) for 500 series

The CP554 is a transformer coupled diode bridge compressor based on the design of legendary British consoles, adapted to the 500 series format.

Write your review