[distortionplus]

Hi,

I bought a pair of earlier 573s on Reverb, not fully working. I've ironed out many of the issues with relative ease but just come down to one last problem that I thought might be good to get some help on.

It's an EQ573-REV1.4

The first three frequencies on the mid band do nothing - the signal is unaffected by boost/cut, the EQ starts working as you would expect at 0.7 onwards.

0.27, 0.36 & 0.5 selections do nothing.

Any clues?

Thanks so much, the EQs sound really good and I'm looking forward to hopefully having them working 100%!  

[JPK]

Check the solder joints of inductor L1, in particular the bottom left pad, near R35.

[distortionplus]

On it - thank you!

[distortionplus]

Check the solder joints of inductor L1, in particular the bottom left pad, near R35.

Fixed!!!!! Thank you so much for the fast response and very helpful advice!

[JPK]