Hello,
Ok strange issue. I used my MP566 yesterday, everything worked fine for about 45 minutes, then I heard a click, and then there was no sound, only emitting some intermittent clicks and pops. I include a sample of the sound.
Then i unplugged the 500 rack for a bit, then turned it on. It worked for about 2 minutes, then the same click, and back to the problem.
I am using a Bento 10, and the rack is filled. Could it be a current problem? Which is strange because the first power up worked for 45 minutes, then only 2 minutes and then the same issue arises.
I was on the High gain setting, cranked input, output on 3.5.
Also, there is a ton of noise when the preamp is at 5 or below on the mid setting, and even more noise on high when input is on 8 or less.
Is it overheated and shutting down?
Thanks
https://soundcloud.com/vcs-verchrona/mp566-issue