Author Topic: Faulty MP566 - video and audio files

January 27, 2022, 02:24:37 AM
Read 1263 times

stevelawaudio

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
https://drive.google.com/drive/folders/1qz0BCwCTZi6MnlKaGArnJ7fTCu40vqWC?usp=sharing

Hi Everyone.. I was given this MP5.66 (happy!)... but its faulty. 

Attached is a link for some audio files and a short video file of the unit.
Not sure if I've done this right, but let me know either way.

Im about to go through the test document and see what I find, but any help would be great to get this going because Id love to buy another one to use for gain makeup in my summing setup.

Cheers, Steve.

January 27, 2022, 03:32:08 PM
Reply #1

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 998
  • Karma: +29/-0
    • View Profile
First thing to do is to test the voltages.
JPK

January 28, 2022, 01:36:30 AM
Reply #2

stevelawaudio

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Tested - 

So, no shorting,
High voltage reads at 225.2v
Low voltage read at -3.1. SMPro little lunchbox, probs why it a little low? 
It's my portable one, the other main rack is a JLM 8 slot.

So, this starts me looking towards a problematic tube ??

S.


January 28, 2022, 04:38:22 PM
Reply #3

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 998
  • Karma: +29/-0
    • View Profile
Can you describe the problem in words, it is no very clear from the audio files?
The LED is blinking. Does it means that the lunchbox PSU is switching on and off? Or is it only the MP566?
Does it pass any audio or none at all?
JPK

January 28, 2022, 09:53:19 PM
Reply #4

stevelawaudio

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
The blinking only happens with the mp566.. all other modules in the rack work fine. 
The pre passes audio and is usable but after about 5-10 mins the blinking starts, the spikes in the audio output start and it becomes unusable. 

Thanks for your help. 

S. 

January 31, 2022, 07:49:41 AM
Reply #5

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 998
  • Karma: +29/-0
    • View Profile
Can you check if the voltages (225V on TP2, +16V, -16V and TP8 ) are steady during the blinking?
JPK