Author Topic: Frequent mistakes

December 27, 2020, 03:42:45 pm
Read 920 times

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 638
  • Karma: +19/-0
    • View Profile
Connectors soldered on the wrong side
Do not try to save the connector! This will very likely damage the PCB which cost 100 times more than the connector.
Instead, split the connector into pieces with cutting pliers until you are able to remove the pins one by one.
Next empty the holes with a de-soldering pump (this one works great : Jonard Industries DP-100).
JPK