Author Topic: Possible to replace PCB C and components?

March 31, 2023, 01:48:00 AM
Read 1040 times

radiounready

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
I attached the cable connectors on PCB C to the wrong side. I removed them, but I am currently unable to fully clear all the through holes. I've used a pump, solder wick, flux, even tried pokikg through with small tools. The residual solder won't come out of three holes. Also, those connections are pretty trashed from repeated heating. 

Assuming I'm unable to recover it, is there an option to buy PCB C and it's components without having to pay for the whole kit again?

March 31, 2023, 04:10:07 PM
Reply #1

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 1105
  • Karma: +36/-0
    • View Profile
You are probably not using a powerful enough pump.
You should try this one:
https://www.mouser.com/ProductDetail/Jonard-Industries/DP-100?qs=kjdRZtHFUmmFtPj%252BuLCSFQ%3D%3D

is there an option to buy PCB C and it's components without having to pay for the whole kit again?
Contact us here.
JPK

March 31, 2023, 05:18:28 PM
Reply #2

radiounready

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
I am using the jonard dp-200. Is that not as powerful as the 100?

April 01, 2023, 09:09:11 AM
Reply #3

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 1105
  • Karma: +36/-0
    • View Profile
It looks good.
If you can't work it out, contact me here for repair or replacement options.
JPK