3. JMP 1
« previous next »
Pages: [1]

Author Topic: JMP 1

July 06, 2022, 07:34:27 PM
Read 742 times

Danchinho

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
JMP 1
Hi,
After soldering JMP 1 on stage 11 of the build, solder one and then check it's vertical then solder the other pins....
Do we trim those pins afterwards?
Logged
July 08, 2022, 07:13:34 PM
Reply #1

Danchinho

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: JMP 1
anyone have any experience of this?
Logged
July 09, 2022, 09:46:18 AM
Reply #2

JPK

  • Administrator
  • Hero Member
  • *****
  • Posts: 1012
  • Karma: +30/-0
    • View Profile
Re: JMP 1
The pins are short and don't need to be trimmed.
Look at the picture after step 18.
Logged
JPK
Pages: [1]
« previous next »
  3. JMP 1