Step..... | Conditions | Result |
1 | Mix = 100% Ratio = 10 Attack = 0.1 Release =1.2 IN button pressed HF lift, 100Hz, 50Hz buttons released Negative meter probe on 0V |
|
2 | Step 1 conditions plus: Input signal = 0V Threshold on +15 Makeup on 0 | TP1, TP2, TP3, TP4, TP11, TP12 = 0VDC TP11: 0.01 VDC |
3 | Step 1 conditions plus: Input signal = 0V Threshold on +15 Rotate Makeup from 0 to +20 | TP12 goes from 0 to -2.3VDC 0 to -2.3VDC |
4 | Input signal = 0V Makeup on 0 Rotate Threshold from -15 to +15 | TP13 goes from -1.8V to +2.8VDC -1.76 to 2.84 |
5 | Input signal = 3VAC (measured between output XLR pins 2&3 with compressor bypassed) Makeup on 0 Threshold goes from +15 to -15 |
|
6 | input signal = 3VAC Threshold on +15 Makeup on 0 | Signal level (VAC) on
|
7 | input signal = 3VAC Threshold on -15 Makeup on +20 | Signal level (VAC) on
|
TP4 goes from 0.060VAC to 0.190VAC 0 VDC