Sound Skulptor forums

Build help and troubleshooting => MP573 Microphone preamplifier => Topic started by: newsoulebel on April 07, 2021, 11:39:56 PM

Title: Paper clip jumper position when NO DI board
Post by: newsoulebel on April 07, 2021, 11:39:56 PM

[font=system-ui, -apple-system, system-ui, .SFNSText-Regular, sans-serif]Boys... i'm trying to test an old Soundskulptor MP573 without a DI board and I remember this can be done by strapping a bent paper clip across two contacts on the CN3 6-pin socket that recieves the header from the DI board. Something like this, but I can't remember if it goes across the first two pins (at the card edge end as in the picture) or the two pins at the other end next to the caps. Can someone confirm? Is this correct?[/font][/color]

[font=system-ui, -apple-system, system-ui, .SFNSText-Regular, sans-serif](https://ibb.co/nMvWwCr)[/font][/color]

Title: Re: Paper clip jumper position when NO DI board
Post by: newsoulebel on April 07, 2021, 11:50:25 PM

<a href="https://ibb.co/nMvWwCr"><img src="https://i.ibb.co/5hy71FT/IMG-0439.jpg" alt="IMG-0439" border="0"></a>

Title: Re: Paper clip jumper position when NO DI board
Post by: newsoulebel on April 07, 2021, 11:51:14 PM

I dunno how to upload pics! click the link and it opens in a new window.

Title: Re: Paper clip jumper position when NO DI board
Post by: JPK on April 08, 2021, 11:02:20 AM

Quote

 if it goes across the first two pins (at the card edge end as in the picture)

Yes correct