Sound Skulptor forums

Build help and troubleshooting => TS500 Tape Simulator => Topic started by: giveaway on May 21, 2026, 12:54:12 PM

Title: TS-500 VU meter setup
Post by: giveaway on May 21, 2026, 12:54:12 PM

Hi!
The setup guide does not seem to mention the state the saturation and bias switches should be in when calibrating the VU meter. Does anyone know?
Sorry if this info is available somewhere, but I have searched quite a bit without finding it.

Title: Re: TS-500 VU meter setup
Post by: JPK on May 21, 2026, 04:36:25 PM

TAPE SAT to the left (-).
The other switches have no effect on this setting.