Sound Skulptor forums

Build help and troubleshooting => CP554 Diode bridge compressor => Topic started by: vwyf11 on March 05, 2026, 03:39:16 AM

Title: V+ and V- voltage
Post by: vwyf11 on March 05, 2026, 03:39:16 AM

Hey,

I’m just getting to testing the compressor and I’m getting readings from V+ to V0 and V- to V0.  It says I should be getting readings between 15-16V negative and positive, but I’m getting readings around 16.7V.  Just wondering if this is going to be an issue.  I’m using a Wes audio titan for testing.

Thanks

Title: Re: V+ and V- voltage
Post by: JPK on March 05, 2026, 04:40:02 PM

Not an issue. The Wes is just a little above the standard voltage.