Sound Skulptor forums

Build help and troubleshooting => DI503J Triple DI and Re-Amp => Topic started by: TheWoodman on February 04, 2026, 06:30:55 PM

Title: DI503J triple DI output buffer
Post by: TheWoodman on February 04, 2026, 06:30:55 PM

Is the output TS jack of the Triple DI buffered (when not in reamp mode, so just paralleling the input signal).

Title: Re: DI503J triple DI output buffer
Post by: JPK on February 04, 2026, 06:49:49 PM

It is just in parallel with the input, without buffering.

Title: Re: DI503J triple DI output buffer
Post by: TheWoodman on February 04, 2026, 06:55:54 PM

Thanks very much for your answer. Depending on levels/impedance this possibly thins out the instrument signal a little when another load (amp for example) is connected to the unbuffered TS output. Which can easilly be handled by placing my own buffer before the input. So thanks again, this is just good to know.