Sound Skulptor forums

Build help and troubleshooting => MP573 Microphone preamplifier => Topic started by: slothproductions on January 28, 2024, 04:00:21 PM

Title: Resistor replacement
Post by: slothproductions on January 28, 2024, 04:00:21 PM

Hello

I'm building the MP573. Unfortunately, I soldered a 4K7 resistor to R6 and cut the legs. I've changed R6 to the right value, but now I can't use the 4K7 resistor as R62 because of the vertical orientation, and I need a new one.

Are these kind of resistors metal film, and should I be aware of anything else other than value, size, tolerance and power rating when buying a replacement? 

/Simon

Title: Re: Resistor replacement
Post by: JPK on January 29, 2024, 11:11:20 AM

Yes, metal film, 0.25W or 0.4W or 0.6W, depending on the brand. All are OK.
Tolerance 1%.

Title: Re: Resistor replacement
Post by: slothproductions on January 29, 2024, 04:20:47 PM

Thanks!