Sound Skulptor forums
Build help and troubleshooting => DI503J Triple DI and Re-Amp => Topic started by: OttoWei on January 02, 2024, 04:57:10 PM
-
Hi!
I just finished the DI503J and I's my first real build since school (20 years back) and it was very a real pleasure! Definitely gonna buy more kits!
1. I followed the Setup guide, but did I miss some info about the trim-pot? What's it for?
2. I also noticed that the link for the schematics don't work. Error 404.
3. And finally an observation, I think i noticed that the sound was a little thin when I plugged an amp into the Instrument Out compared to going straight into the amp. Could this be the case? And is it something I can correct?
-
but did I miss some info about the trim-pot? What's it for?
Step 4 in the setup guide: It is used to set the level of the DIST sound, in order to keep the level equal when switching ON and OFF.
I also noticed that the link for the schematics don't work. Error 404.
Sorry, corrected now.
I think i noticed that the sound was a little thin when I plugged an amp into the Instrument Out compared to going straight into the amp
It shouldn't. The through connection is hard wired. Can you do some level testing with a sine tone at various frequencies?