Sound Skulptor forums

Build help and troubleshooting => MP573 Microphone preamplifier => Topic started by: PACO on December 06, 2023, 06:21:49 PM

Title: Lunchbox Aux I/O vs MP573
Post by: PACO on December 06, 2023, 06:21:49 PM

Hi Jean Paul and everybody,

I have a question. I would like to have my MP573 working for tracking voices (Input in the Lunchbox direct to a mic) and alao I wanna use the MP573 for mixing signals in the DAW.

So, the only way I think for doing this without plug and amplug cables in the rear of the lunchbox is using the auxiliar I/O that my MIDAS Legend L10 has.

But it doesn't work.

Do you know if it's compatible or if there's a way of doing without a patchbay?

Many thanks!

Paco

Title: Re: Lunchbox Aux I/O vs MP573
Post by: JPK on December 07, 2023, 09:06:35 AM

It doesn't work because Midas uses the connector pins 9 and 11 for the aux input. These pins are not the API standard. They are not connected in the MP573.
Sorry, you will need some kind of patchbay.

Title: Re: Lunchbox Aux I/O vs MP573
Post by: PACO on December 07, 2023, 10:07:39 AM

Ohh, it what i was afraid for..

Many thanks, JP!