Sound Skulptor forums

Build help and troubleshooting => CP4500 Stereo Bus Compressor => Topic started by: rob@roblanter.com on January 31, 2021, 06:00:46 PM

Title: How can I test the Side Chain HF Lift?
Post by: rob@roblanter.com on January 31, 2021, 06:00:46 PM

How can I test the Side Chain HF Lift?

Thanks,

Rob

Title: Re: How can I test the Side Chain HF Lift?
Post by: JPK on January 31, 2021, 06:31:02 PM

Send a high frequency sine signal like 10kHz to the compressor.
Dial in some compression to reduce the signal level.
Press the HF lift switch.
The output signal level goes down because the side chain compresses the high frequencies more.