Sound Skulptor forums
Build help and troubleshooting => AB528 Microphone preamplifier => Topic started by: UrbanOsterman on November 26, 2022, 06:11:36 PM
-
I have just finnished a kit MP AB528
It works Good in a 501 Single 500 Host
But it is very Noisy in A Fredenstein Bent 10S Host
Is there any Known problems with the power supply from a Bento 10S?
Regards
Urban Osterman
-
The external noise may come from 2 sources:
- radiated on short distances,
- from the power rails.
On our Bento6, the noise cannot be heard at the maximum gain.
-
Probably temporary buzz.
Works OK now!