Sound Skulptor forums

Build help and troubleshooting => CP4500 Stereo Bus Compressor => Topic started by: Chiller on October 28, 2022, 02:10:30 PM

Title: Stereo image changes
Post by: Chiller on October 28, 2022, 02:10:30 PM

Hello,

I didn't find a match in the topics, so I start a new one ::)
After the build the CP4500 works very fine but since some days I had a strange issue:
when turning zu Threshold down, the stereo image changes to one side and the other one just has a very low signal.
I turn it to -15db - it pans to the left side, when I bring the makeup-gain in, I can bring the level of the right side back to level match.
It seems like the threshold and the makeup-gain knobs working like panning-knobs?!?:o

Can you please help out?
Thanks so much.
Chris

Title: Re: Stereo image changes
Post by: JPK on October 29, 2022, 12:02:46 PM

Is the side that stays loud compressing? Check by disconnecting the other side input signal.

Title: Re: Stereo image changes
Post by: Chiller on November 04, 2022, 11:48:23 AM

Hey,

today I checked everything again and the problem was not the CP4500 but a faulty channel of my lunchbox.
Now everything works fine...
So thanks for your time and sorry for wasting it a little.::)???

Have a nice day!
Chris

Title: Re: Stereo image changes
Post by: JPK on November 04, 2022, 06:35:35 PM

Good news!