Sound Skulptor forums

Build help and troubleshooting => First Aid => Topic started by: Thopa on November 26, 2021, 10:04:35 PM

Title: 501 connector polarity with xt500 and jumper pins settings??
Post by: Thopa on November 26, 2021, 10:04:35 PM

Hi!
New member here :)

I just finished a 501 host and i have added a xt500 extender.

I this the correct orientation?

Picture (https://www.dropbox.com/s/jx1jcpk3teu00nj/Photo 26-11-21%2C 21 31 41.jpg?dl=0)

Do i have to place the jumpers on the 3 rows in any setting?

Apologies its my first 500 build, cheers

Ps: the yellow tape is to avoid contact between the switcher botton pcb and the blue conector.

Title: Re: 501 connector polarity with xt500 and jumper pins settings??
Post by: JPK on November 29, 2021, 05:56:12 PM

Yes, correct.